Nicolás Correa FP 30/30 mobile table-mounted gantry milling machine used

The Nicolás Correa FP 30/30 portable bed-type? it is a large-format machine from the year 1994 serial number 8900102, governed by numerical control Heidenhain TNC 426 with mobile console and portable wheel HR. Its fixed-bridge architecture with table travel on the longitudinal axis orientates it to heavy-piece machining, with an oversized structure and wide sliding guides that provide rigidity and damping in roughing operations.

The workbench measures 3.000 × 1.250 mm, disponde de 7 T-slots of 22 mm and supports a maximum load of 10.000 kg. The travel routes are from 2,500 mm in X, 2,000 mm in Y and 800 mm in Z , with a light between columns of 1.740 mm that defines the useful pass-through width under the portal. The rapid advances reach 15 m/min in the longitudinal axis and 12 m/min in the crosspieces.

The unit mounts 90° skew-headed with automatic indexing every 2.5° and tool hydraulic clamping cone ISO 50 / BT 50, with 30 kW of power, maximum torque 725 Nm and 3.000 rpm. Incorporates system of automatic head changer and 60-position ATC warehouse..., an unusual capability in the second-hand market that allows handling long series with multiple tools without operator intervention. The set weighs 25,500 kg and measures 7,435 × 3,587 × 4,845 mm.

It is a machine aimed at workshops in machining, heavy boiler-making, molds and die-casting that need to incorporate large-format milling capacity with a contained investment. Check availability and inspection conditions.